Cabinet Handling and Final Room
Move the main cabinet through doors and stairs before the legs or headbox make it larger. Protect glass and finished cabinet graphics during handling. A machine that is too heavy or delicate for the access route may require specialty moving rather than ordinary assembly.
Legs and Levelers
Attach legs in the correct positions and tighten them evenly so the cabinet does not twist. Adjustable feet should bring the machine to a stable stance and approximate playing angle without leaving one leg barely engaged.
Headbox and Harness Connections
The backbox or head assembly should be lifted and secured according to the manufacturer procedure. Factory harness plugs should be matched carefully and kept away from pinch points. Electronics diagnosis is outside basic assembly.
Playfield Glass and Accessories
Install glass, balls and loose accessories only after the cabinet is stable. If shipping locks or brackets are present, follow the machine instructions for removal before normal operation.
For multiple arcade cabinets and game tables in one room, arcade and game table assembly may be the broader project page.
Power and Final Check
Use an existing appropriate outlet and keep the cord clear of the levelers. Call NJ-GoodHome at (223) 226-1828 with access photos and the pinball model to discuss setup scope.
Within a pinball machine assembly request, assembly & installation and ab machine assembly stay separate paths when either issue expands beyond this page’s scope.