Cabinet Sections and Base
Long tables may arrive in multiple cabinet or cradle sections. Join structural pieces according to the manual and keep the base square before the playing surface is installed. Uneven tightening can introduce twist along the length.
Room Length and Player Clearance
The table needs approach space at both ends, not only its listed length. Measure doors, turns and stair landings because a long playfield or cabinet section can be much harder to maneuver than its width suggests.
Playing Surface Placement
The board should be supported evenly and centered in the cradle. Avoid dragging or flexing a long solid-wood playfield during handling. Climate adjusters or supports should be installed in the specified positions rather than treated as optional hardware.
Leveling Along the Full Length
Check level in more than one direction and at several points. Leg levelers can correct minor floor variation, but the base should not be forced into a twist to compensate for a badly uneven surface.
For other game tables, arcade and game table assembly routes to the correct product-specific page.
Final Accessories
Install scoring pieces, gutters and protective covers after the main board is stable. Call NJ-GoodHome at (223) 226-1828 with the model, table length and destination-room photos.
Within a shuffleboard table assembly request, assembly & installation and air hockey table assembly stay separate paths when either issue expands beyond this page’s scope.